Our products are of International Standard. We are under process of getting ISO 9001- 2000 and expected to get shortly to confirm our commitment to produce the quality product. We also carter to needs of our esteemed customers according to their specifications. We as Company believe in quality with further scope of improvement to fulfill the needs of our esteemed customers.

We make products as our customers requirements as in non ferrous metal alloys every party has different requirements suiting them the best. We try to meet our customer needs as precisely as possible. The different alloys we manufacture are as below.

Aluminum alloys
The International Alloy Designation System is the most widely accepted naming scheme for wrought alloys. Each alloy is given a four-digit number, where the first digit indicates the major alloying elements.

• 1000 series are essentially pure aluminium with a minimum 99% aluminium content by weight and can be work hardened.
  
  
• 2000 series are alloyed with copper, can be precipitation hardened to strengths comparable to steel. Formerly referred to as duralumin, they were once the most common aerospace alloys, but were susceptible to stress corrosion cracking and are increasingly replaced by 7000 series in new designs.
  
  
• 3000 series are alloyed with manganese, and can be work-hardened.
  
  
• 4000 series are alloyed with silicon. They are also known as silumin.
  
  
• 5000 series are alloyed with magnesium, derive most of their strength from work hardening. It is suitable for cryogenic applications and low temperature work. However is susceptible to corrosion above 60°C.
  
  
• 6000 series are alloyed with magnesium and silicon, are easy to machine, and can be precipitation hardened, but not to the high strengths that 2000, and 7000 can reach.
  
  
• 7000 series are alloyed with zinc, and can be precipitation hardened to the highest strengths of any aluminium alloy.
  
  
• 8000 series is a category mainly used for lithium alloys.
  
  
• Copper Alloys/ Wirebars
  
  
• Tin Bronze Ingots
  
  
• Aluminum Bronze
  
  
• Leaded Bronze
  
  
• Brass ingots/alloys

Alloy Si Fe Cu Mn Mg Cr Zn V Ti Bi Ga Pb Zr Limits†† Al Each Total 1060 0.25 0.35 0.05 0.03 0.03 0.03 0.05 0.05 0.03 0.03 0.03 0.03 0.03 0.03   99.6 min 1100 0.95 Si+Fe 0.05-0.20 0.05     0.10             0.05 0.15 99.0 min 2014 0.50-1.2 0.7 3.9-5.0 0.40-1.2 0.20-0.8 0.10 0.25   0.15         0.05 0.15   2024 0.50 0.50 3.8-4.9 0.30-0.9 1.2-1.8 0.10 0.25   0.15         0.05 0.15 remainder 2219 0.2 0.30 5.8-6.8 0.20-0.40 0.02   0.10 0.05-0.15 0.02-0.10       0.10-0.25 0.05 0.15 remainder 3003 0.6 0.7 0.05-0.20 1.0-1.5     0.10             0.05 0.15 remainder 3004 0.30 0.7 0.25 1.0-1.5 0.8-1.3   0.25             0.05 0.15 remainder 3102 0.40 0.7 0.10 0.05-0.40     0.30   0.10         0.05 0.15 remainder 4043 4.5-6.0 0.80 0.30 0.05 0.05   0.10   0.20         0.05 0.15 remainder 5052 0.25 0.40 0.10 0.10 2.2-2.8 0.15-0.35 0.10             0.05 0.15 remainder 5083 0.40 0.40 0.10 0.40-1.0 4.0-4.9 0.05-0.25 0.25   0.15         0.05 0.15 remainder 5086 0.40 0.50 0.10 0.20-0.7 3.5-4.5 0.05-0.25 0.25   0.15         0.05 0.15 remainder 5154 0.25 0.40 0.10 0.10 3.10-3.90 0.15-0.35 0.20   0.20         0.05 0.15 remainder 5356 0.25 0.40 0.10 0.10 4.50-5.50 0.05-0.20 0.10   0.06-0.20         0.05 0.15 remainder 5454 0.25 0.40 0.10 0.50-1.0 2.4-3.0 0.05-0.20 0.25   0.20         0.05 0.15 remainder 5456 0.25 0.40 0.10 0.50-1.0 4.7-5.5 0.05-0.20 0.25   0.20         0.05 0.15 remainder 6005 0.6-0.9 0.35 0.10 0.10 0.40-0.6 0.10 0.10   0.10         0.05 0.15 remainder 6005A† 0.50-0.9 0.35 0.30 0.50 0.40-0.7 0.30 0.20   0.10         0.05 0.15 remainder 6060 0.30-0.6 0.10-0.30 0.10 0.10 0.35-0.6 0.5 0.15   0.10         0.05 0.15 remainder 6061 0.40-0.8 0.7 0.15-0.40 0.15 0.8-1.2 0.04-0.35 0.25   0.15         0.05 0.15 remainder 6063 0.20-0.6 0.35 0.10 0.10 0.45-0.9 0.10 0.10   0.10         0.05 0.15 remainder 6066 0.9-1.8 0.50 0.7-1.2 0.6-1.1 0.8-1.4 0.40 0.25   0.20         0.05 0.15 remainder 6070 1.0-1.7 0.50 0.15-0.40 0.40-1.0 0.50-1.2 0.10 0.25   0.15         0.05 0.15 remainder 6082 0.7-1.3 0.50 0.10 0.40-1.0 0.60-1.2 0.25 0.20   0.10         0.05 0.15 remainder 6105 0.6-1.0 0.35 0.10 0.10 0.45-0.8 0.10 0.10   0.10         0.05 0.15 remainder 6162 0.40-0.8 0.50 0.20 0.10 0.7-1.1 0.10 0.25   0.10         0.05 0.15 remainder 6262 0.40-0.8 0.7 0.15-0.40 0.15 0.8-1.2 0.04-0.14 0.25   0.15 0.40-0.7   0.40-0.7   0.05 0.15 remainder 6351 0.7-1.3 0.50 0.10 0.40-0.8 0.40-0.8   0.20   0.20         0.05 0.15 remainder 6463 0.20-0.6 0.15 0.20 0.05 0.45-0.9   0.05             0.05 0.15 remainder 7005 0.35 0.40 0.10 0.20-0.7 1.0-1.8 0.06-0.20 4.0-5.0   0.01-0.06       0.08-0.20 0.05 0.15 remainder 7072 0.7 Si+Fe 0.10 0.10 0.10   0.8-1.3             0.05 0.15 remainder 7075 0.40 0.50 1.2-2.0 0.30 2.1-2.9 0.18-0.28 5.1-6.1   0.20         0.05 0.15 remainder 7116 0.15 0.30 0.50-1.1 0.05 0.8-1.4   4.2-5.2 0.05 0.05   0.03     0.05 0.15 remainder 7129 0.15 0.30 0.50-0.9 0.10 1.3-2.0 0.10 4.2-5.2 0.05 0.05   0.03     0.05 0.15 remainder 7178 0.40 0.50 1.6-2.4 0.30 2.4-3.1 0.18-0.28 6.3-7.3   0.20         0.05 0.15 remainder †Manganese plus chromium must be between 0.12-0.50%. ††This column lists the limits that apply to all elements, whether a table column exists for them or not, for which no other limits are specified. Wrought aluminium alloy composition limits (% weight)